Program of the Conference
ACADEMY OF SCIENCES AND ARTS OF THE REPUBLIC OF SRPSKA
PROGRAMME OF THE
INTERNATIONAL SCIENTIFIC CONFERENCE
CONTEMPORARY MATERIALS 2010
Banja Luka, July 2 and 3, 2010
ORGANIZER OF THE CONFERENCE
Academy of Sciences and Arts of the Republic of Srpska
Under the patronage of
Ministry of Science and Technology of the Republic of Srpska
The Republic of Srpska Fond for protection of the Enviroment
The scientific conference will take place in the Cultural centre Banski dvor.
Friday, July 2, 2010
Arrival of the participants and accommodation in the hotel „Bosna“
Registration of the participants (hotel „Bosna“ and Cultural centre Banski dvor)
Opening ceremony at 5. p.m. in the Cultural centre Banski dvor
Joint dinner in the restaurant of the hotel „Bosna“ at 8.p.m.
Saturday, July 3, 2010
8,30 Registration of the participants in the Cultural centre Banski dvor
Friday, July 2, 2010
OPENING CEREMONY
17,00–17,30
Rajko Kuzmanović, president of ASARS, will give the opening speech and he will welcome the participants of the conference
Welcome speech – Minister of Science and Technology dr Bakir Ajanović
Welcome speech of the guests
WORKING SESSION
17,30–19,00
Plenary session
17,30–19,00
17,30–18,00 Z. Petrović
Polymers from biological oils
18,00–18,30 L. Lazov, N. Angelov
50 years since the laser has been invented
18,30–19,00 M. Kojić, B. Stojanović, V. Ranković, J. Butler, A. Tsuda
Characteristics of biological membranes in lung microstructure
20,00 Dinner in the restaurant of the hotel „Bosna“
Saturday, July 3, 2010
Plenary session
9,00–13,00
9,00–9,30 M.A. Montealegre, G. Castro, P. Rey, J.L. Arias, P. Vasquez, M. Gonzalez
Surface treatments by laser technology
9,30–10,00 M. Damnjanović, I. Milošević
On the coiled carbon nanotubes
10,00–10,30 D. Raković, M. Dugić, J. Jeknić-Dugić, M. Plavšić, G. Keković, D. Davidović, I. Ćosić, L. A. Gribov, S. Jaćimovski, B. Tošić, J. Šetrajčić
On some quantum approaches to biomolecular recognition
10,30–10,45 Coffee break
10,45–11,15 L. Matija
Nanotechnology solutions of water proton transport in microtubules and carbon nanotubes
11,15–11,45 M. Logar, B. Jančar, A. Rečnik, S. Šturm, D. Suvorov
Polyelectrolyte multilayer template assisted in-situ synthesis of inorganic nanostructures
11,45–12,15 B. Tomčik
Characterization of ultra thin diamond like carbon films
12,15–12,45 T. M. Pavlović, D. D. Milosavljević
Application of solar cells in modern architecture
13,00–15,00 Lunch in the restaurant of the hotel „Bosna“
Poster session
(15,00–19,00)
1. Z. P. Popović, I. Milošević, M. Damnjanović
Strain favorable transformation hexagonal into pentaheptite carbon nanotubes
2. J.P. Šetrajčić, D. Lј. Mirjanić, S. M. Vučenović, S. Pelemiš, B. Škipina
Permitivity in molecular nanodimensional film-structures
3. J. P. Šetrajčić, I. J. Šetrajčić, S. Armaković, A. J. Šetrajčić – Tomić, B. Markoski
Optical specificity of ultrathin crystalline examples
4. M. Papić-Obradović, D. Kojić, L. Matija, Đ. Koruga
Papanicolaou test analysis using digital imaging based on opto-magnetic fingerprint of samples: Preliminary study
5. N. Filipović, D. Petrović, V. Isailović, A. Jovanović, M. Kojić
Modeling of self-healing process in new nanocoating of surfaces by material with containers filled with healing agent
6. Z. Ćurguz, D Mirjanić, S. Pelemiš
Nanostructural materials for renewable energy sources
7. M. Vrućinić, G. Vollenbroek, L. Kuipers
Nanofabrication of 3D nanophotonics by using direct laser writing
8. S. K. Jaćimovski, D. I. Raković, J.P. Šetrajčić, S. Armaković, V. D. Sajfert
Phonon heat conductivity of some layered structures
9. D. Malivuk, S. Nježić, S. Lekić, Z. Rajilić
Regularity – Chaos Transition Temperature and Guisiers Buchaillot Equation
10. N.V. Delić, S. Armaković, S. Cvetković, I. J. Šetrajčić, V. Holodkov
Nanomaterials as carriers of information technology
11. A. R. Tančić, M. Kutin, M. Davidović,
Structural and spectral pecularities of the endohedral fullerenes
12. V. Jokanović, B. Čolović
Nanostructured design of materials by various methods of the chemical synthesis
13. V. Jokanović
Nanomedicine and bone tissue engineering: perspective and challenges
14. B. Pejović, D. Vujadinović, M.Gligorić, M.Tomić
Technology of amalgamation of new materials
15. V. Mićić, M. Jotanović, Ž. Lepojević, G. Tadić, B. Pejović
Modeling of the sage leaf – supercritical carbon dioxide extraction system
16. M. G. Pavlović, Lj. J. Pavlović, M. M. Pavlović, M. V. Tomić
Morphology of iron powder particles electrodeposited from different electrolytes
17. B. Pejović, D. Novaković, V. Mićić, M. Tomić, M. Jotanović, V. Lazić
Investigation of print properties for polymeric packing materials
18. B. Pejović, D. Novaković, V. Lazić, V. Mićić, M. Jotanović, M. Tomić, G. Tadić
Modern materials in making packing
19. M. V. Tomić, M. M. Bučko, M. G. Pavlović, J. B. Bajat
Corrosion stability of Zn-Mn Alloy coating electrochemicaly deposited
20. M.G. Pavlović, R. Fuchs-Godec, M.V. Tomić, M. Jotanović
Corrosion inhibitors for protection of copper and copper alloys
21. R. Macura, D. Lazić, P. Dugić, B. Škundrić, J. Penavin-Škundrić
Adsorption aqueous solutions of Acid Red 57 in 4A – type synthetic zeolite
22. S. Zeljković, J. Penavin-Škundrić, T. Ivas, S. Voše
Synthesis of Ba0.5Sr0.5Co0.8Fe0.203 – δ from different precursor materials employing microwave heating
23. R. Petrović, N. Čegar, J. Penavin – Škundrić, D. Lazić, B. Škundrić
Adsorption of ethanol from gas phase on mordenite (m)
24. Z. Levi, J. P. Škundrić, D. Lazić, N. Čegar, B. Škundrić
Phenol adsorption mechanism on alumosilicate materials in the function of ph enviroment
25. S. Zeljković, D. Jelić, Z. Levi, J. Penavin-Škundrić, D. Branković, S. Vujić
The sorption of cobalt and copper ions from aqeous solutions on Ba0.5Sr0.2Co08Fe0.203-δ perovskite
26. S. Sladojević, B. Škundrić, D. Bodroža, J. Penavin-Škundrić, D. Lazić, S. Vujasinović
Surface Chemistry of the BETA Zeolite
27. M. Dugić, P. Dugić, Z. Petrović
Synthetics esters in lubricant formulations
28. B. Škundrić, J. Škundrić, R. Macura
Thermodynamic Functions in the Electrolytic solutions
29. P. Dugić, Z. Petrović, V. Aleksić, T. Botić
Production and application of paraffins
30. I. Stojković, N. Cvjetićanin, S. Mentus
Electrochemical performance of Li1.2V308 in saturated aqueous solution of LiN03
31. I. Dervišević, M. Ristić, D. Minić, N. Talijan, M. Kolarević
Alloy characterization of ternary Ga-Sb-Zn system
32. D. Minić, J. Đokić, D. Manasijević, D. Živković, I. Dervišević, A. Žorić
Experimental investigation and thermodynamic calculation of phase equilibria in the In-Sb-Zn ternary system
33. R. Smiljanić, D. Lazić, D. Smiljanić, Ž. Živković, M. Smiljanić
Optimization of filtration and washing production aluminium hydroxide
34. D. Smiljanić, D. Lazić, S. Matić, R. Smiljanić, N. Nikolić
Optimization of the zinc removal process from sodium aluminate process liquers
35. V. Jevtović, D. Vidović, D. Cvetković
Synthesis, X-ray characterization and Antimicrobial activity of Iron (I) and Cobalt (III) complexes with the Schiff Base derived from Pyridoxal and semicarbazide, S-methylisothiosemicarbazide
36. M. Hribšek, S. Ristić, B. Radojković
Contemporary materials for SAW chemical sensors
37. D. Jelić, S. Mentus, J. Penavin-Škundrić, D. Bodroža, V. Antunović
A thermogravimteric study of reduction of silver oxide under non-isothermal conditions
38. Z. Janjuš, A. Petrović, A. Jovović, R. Prokić-Cvetković, P. Ilić
Change of strenght shearing of polypropylene filled with glass powder
39. P. Hadžić, M. Popsavin, S. Borozan
Towards new surface active compounds based on natural materials – New approach for new structures
40. V. M. Zorić, J. P. Šetrajčić
Role of contemporary materials in detection of micro-traces on the place of crime execution
41. I. J. Šetrajčić, D. Ćulibrk, N. Delić, B. Markoski
Enhanced saturation filter approach to outlier detection
42. T. M. Pavlović, Z. Pavlović, L. Pantić, Lj. Kostić
Determining optimum tilt angles and orientations of photovoltaic panels in Nis, Serbia
43. M. G. Pavlović, M. M. Pavlović
Fundamental aspects of bright metal surfaces formation in metal electrodeposition
44. T. M. Pavlović, D. D. Milosavljević
Development of solar plants in the world
45. M. Davidović, A. Janićijević
Fuell cells on the basis of some proton dynamics properties H202 of compounds
46. I. Vlajić-Naumovska, I. Nenčić, B. Čupić
The materials for manufacturing of the components of wind turbines
47. N. Voćkić, B. Predojević
Advantages of using monochromatic photovoltaic cells over the conventional solar cells
48. A. Tančić, M. Kutin, M. Davidović
Vacancy decays in the photoionization process of the endohedral atoms
49. E. Jakupović
Contemporary materials and renewable energy sources
50. M. Zlatanović, I. Popović
The gas discharge static characteristics in pulse regime
51. V. Petrović, S. Obradović, A. Žorić, H. Milošević
Influence of mechanical activation on structural and properties of sintering MgTi03
52. A. Č. Žorić, S. Obradović, D. M. Minić
PC Based Precise Digital Equipment for qualitative DTA of Materials
53. M. Srećković, S. Pantelić, N. Borna, A. Janićijević, A. Bugarinović, S. Bojanić, R. Aleksić, M. Kovačević
Contemporary materials and laser and other elion technique
54. D. Djelopavlić, D. Pantić, B. Đorđević
Simulation of hetero-junction silicon solar cells
55. V. Đukić, B. Đukić
Electro-engineering and electronic waste recycling
56. L. Lazov, N. Angelov
Physical model for laser marking of metals and alloys
57. L. Lazov, A. Atanasov, N. Angelov
Influence of the surface quality to the contrast in the laser marking
58. D. Jevremović, R. Williams, T. Puškar, D. Eggbeer, B. Trifković
Selective melting with laser in making metal dental constructions
59. S. Panayotova
Regenerating raw material agave sisalana – alternatives for its application
60. I. Dervišević, M. Ristić, D. Minić, N. Talijan
Experimental investigation and thermodynamic calculation of the Au-Cu-Sb phase diagram
61. H. Avdušinović
Influence of wall thickness and austempering time on hardness of austempered ductile iron
62. B. Muminović, O. Beganović, S. Memčić
Application of new construction and materials for making the accessories for short-time and long-time tensile testing of superalloys elevated temperatures
63. M. Oruč, M. Rimac, O. Beganović, A. Klobodanović
Research and development of new materials
64. B. Fakić, E. Kratina, A. Burić, M. Rimac
The relationship between microstructure and properties of welded joints at hardness testing according to standard EN 1043-1
65. M. Šljivić, M. Stanojević, N. Grujović, R. Radonjić
Optimization of rapid protoyping technology for advanced medical application
66. D. Ješić
Applicable methods of measuring at selection of mechanical and tribological characteristics of material
67. P. Dakić
Technology of processing contemporary materials
68. P. Dakić
Some new materials in electrical engineering and electronics
69. B. Katavić, S. Ristić, Z. Nikolić, M. Vilotijević, M. Puharić
Copper and aluminium in cultural heritage: the analysis of treshold damaged of material in interaction with ruby laser
70. M. Kutin, S. Ristić, M. Puharić, M. Vilotijević, M. Krmar
Termographic testing of epoxy-glass tensile properties
71. Z. Božičković, M. Šljivić, R. Božičković, A. Blagojević
Materials for making polygon tubes
72. D. Ćulibrk, I. J. Šetrajčić, J. Šetrajčić
Data mining and machine learning approach to predicting crystal structure
73. Lј. Janjušević, M. Kutin, M. Prokolab
Application of steels for cutting tools
74. J. Savanović, R. Zrilić
Production of technical minerals for metallurgy and building constructions
75. M. Todić, O. Miletić
Mechanical properties of border layer of two-layer composite
76. D. Kojić, Lј. Petrov, Đ. Grga, B. Dželetović, D. Šarac, Đ. Koruga
Characterisation of dental tissues on the basis of light-matter interaction
77. M. Nedić, D. Đukanović
Clinical comparison of bioabsorbable barriers with non-resorbable barriers in guided tissue regeneration in the treatment of human intrabony defects
78. Ž. Kojić, N. Trtić, D. Đukanović, O. Dolić, N. Gajić
Effect of LACALUT toothpaste in periodontics
79. M. Umićević-Davidović, A.Arbutina, M. Arapović-Savić, V. Mirjanić
Properties and use of acrylate in orthodontics
80. S. Marin, I. Đukić, S. Selaković, D. Selaković
The use of beta-tricalcium phosphate in oral sugery
81. J. Vojinović, S. Sukara, O. Dolić, Đ. Mirjanić, M. Obradović
Remineralization of early caries lesions with glass-ionomer cements
82. M. Obradović, J. Vojinović, O. Dolić, S. Sukara
Applying contemporary agents and materials in prevention and therapy of early childhood caries
83. O. Dolić, J. Vojinović, M. Obradović, S. Sukara, Ž. Kojić, N. Trtić
Application of composites, compomers and glass-ionomer cements in caries prevention on occlusal tooth surface
84. R. Josipović, O. Perić, N. Gajić, V. Mirjanić
Adhesive systems in dentistry
85. B. Trifković, I. Budak, D. Jevremović, T. Puškar, A. Todorović
Influence of the ways of removing excess composite resin cement materials on the degree of surface roughness
86. J. Vojinović, O. Dolić, Đ. Mirjanić, S. Sukara, M. Obradović
Succes rate of the endodontic treatment of young permanente teeth with calcium hydroxide paste
87. T. Puškar, S. Jevremović, L. Blažić, D. Vasiljević, D. Pantelić, B. Murić, B. Trifković
Holographic interferometry as a method for measuring strain caused by polymerization shrinkage of dental composite
88. I. Đukić, S. Marin, S. Selaković, D. Selaković
The use of baloon catheter in maxillary synus floor lifting
89. N. V. Radosavljević-Stevanović
Contemporary materials as drug designers
90. V. Mirjanić, S. Čupić, A. Arbutina, M. Arapović-Savić, M. Umićević-Davidović, V. Veselinović
Con Tec LC Light – Curing Adhesive in Orthodontics
91. S. Gnjato
Investigating permanent teeth hardness
92. R. Vrhovac-Petrović
Materials for drug incapsulation
93. V. Veselinović, D. Marković, V. Mirjanić, V. Kecman, J. Glušac
Usage of Y-TZP (ytrium stabilized zirconium dioxide) in dental prothetics
94. N. Tanasković
Contemporary approach in treatment of bone defects
95. Z. Vukić, Lј.D. Džambas, M. Arapović-Savić
Self bonding acrylate – embedding of total imediate tooth replacement
96. M. Arapović – Savić, M. Umićević-Davidović, A. Arbutina, V. Mirjanić, Z. Vukić
Properties of materials used for manufacturing of orthodontic brackets
97. D. Marković, B. Petronijević, L. Blažić, I. Šarčev, T. Atanacković
Bond Strength of Three Core Build-up Materials Used to Restore Maxilliary Incisor Teeth
98. O. Perić, V. Mirjanić, R. Josipović
Contemporary composite materials
99. J. Božić
Contemporaneity of traditional materials: Construction with bamboo
100. J. Božić
Ecological footprint of polyvinyl chloride (PVC) building materials
101. B. Malinović, J. Mandić, M. Maksimović, S. Bunić, N. Damjanović
Process simulation and economic analysis of biodiesel production facility
102. V. Đukić
Biotechnology in protection of the environment
103. M. Stanković, J. Stanković
Energy sustainable design in modern practice of Banja Luka
104. M. Stanković, J. Stanković
Life and space – realization of the vision with a view to the future
105. M. Stanković, S. Stanković
Identity in space – material and form
18,30 Discussion
19,00 CLOSING CEREMONY
20,00 Dinner in the restaurant „ Studenac “ in Banja Luka
Sunday, July 4, 2010
Departure of the participants